Calender machine using safety regulations.

The calender consists of a number of rotating roll bodies and the machine is automatically controlled by the control chamber.
In the operation of the calendering machine or maintenance operations should pay attention to the following points:
Calendering machine noise will be more than 85 dB, stay in the vicinity of the staff to remember to use the hearing protector;
The operator must check and determine that no one is working near the calendering machine and at the same time know where the employee is;
When maintenance or repair work is carried out, the power supply for the relevant area must be switched off from the safety switch of the individual motor. Must prevent accidental start; stairs and operating platform to keep oil-free, no waste paper or other debris;
 The rollers in rotation can not be touched by hand or other items.
The edge of the platform should have a railing protection.
When the paper is broken, the nip is automatically opened. When the calender is running, no one is allowed to stay in the area where the nip is opened.
Be especially careful: the heat hose inside the calender can not be touched directly by hand.
Observe all warning signs and illustrations in the calender machine.
Note that the blade is sharp, especially when the scraper is not opened or scraper is replaced.
When the machine is running, any dangerous mechanical adjustments are prohibited.

Comments

Post a Comment

Popular posts from this blog

The main parameters of the calender machine

Core Tip: The main parameters of the calender usually refers to the number of rollers, diameter and length of work. According to these parameters can know the machine's process performance. In addition, these parameters are also the basis for the classification and presentation of calenders. According to the current standard, the presentation of the calender is as follows, such as calender 3-710-1800. This means that the three rolls are calendered     The main parameters of the calender usually refer to the number, diameter and length of the roll. According to these parameters can know the machine's process performance. In addition, these parameters are also the basis for the classification and presentation of calenders. According to the current standard, the presentation of the calender is as follows, such as calender 3-710-1800. This represents a three-roll calender with a roll diameter of 710 mm and a roller working portion length of 1800 mm, which is manufactured accordi...
Read more

About metal plate stamping and marking

Many factories offer a wide range of metal plate embossing and marking machines for embossing, recessing, indentation and marking of metal plates and labels, durable, can withstand discoloration, paint, corrosion and environmental damage. Metal label presses are also known as metal label embossing machines that can produce embossed or depressed numbers and alphabetic characters (usually simplex 2) on metal labels. The spot metal label marking machine uses a metal needle to permanently indent mark the surface to create indented dot matrix characters and high quality graphics. Metal Labels Laser Marking Machines Use Laser Beam Etching and Engraving High Quality Characters, Barcodes and Graphics. Some embossing roller machines and dot matrix players can generate 2D data matrix barcodes on metal labels that can be scanned with 2D data matrix bar code handheld scanners for automatic data collection and tracking. Metal Barcode Tracking software can be used for seamless integration of as...
Read more

What are the main types of calendering machine?

The main types of calenders are as follows: (1) according to the use of technology points, can be divided into paste calendering machine, rubbing calendering machine, tablet press, pressure-type calender, paste calender and experimental calender machine . (2) according to the number of rollers, can be divided into two-roll calender, three-roll calendering machine, four-roll calender, five-roll calendering machine and multi-roll calender (such as seven-roll calender). (3) According to the arrangement of the roller, can be divided into I-shaped calender, r-shaped (also known as inverted I-shaped or F-shaped) calender, I-calender, Z-calender, inclined Z-calender, S-shaped calender, A-shaped calender and other forms of calendering machine.
Read more