Do you know how to use Ultrasonic embossing machine?

Ultrasonic embossing machine, also known as ultrasonic lace machine, is an efficient stitching, embossing equipment. Mainly used for synthetic fiber fabric seam, welding, melting, embossing, etc., processing products with good watertight, high production efficiency, no needle and thread accessories, melting surface smooth without burrs, feel good and so on. Widely used in clothing, toys, food, environmental non-woven bags, masks (cup masks, flat masks, three-dimensional masks, etc.) and other industries.

1. Remove the packaging, check the equipment surface and the various parts of the traces of damage, check the screw is loose, the electrical connector is locked, the accessories are complete.
2. The Metal embossing machine equipment should be placed on a flat hard surface, requiring the lace machine to deviate from the heat source by at least 0.5 meters and to ensure that the lace machine is at least 1 meter before and after, at least 0.5 meters of space for operation.
3. Check the voltage requirements of the sign on the backpack, and make sure the system is well grounded.
4. Connect the equipment to the power supply and the air supply. Be sure to turn off the power switch first. Note the voltage requirements of the machine: AC220V, 50-60Hz
5. The air pipe is connected to a clean and non-lubricating compressed air source with a rated working pressure of 0.6MPa.

Comments

Post a Comment

Popular posts from this blog

The main parameters of the calender machine

Core Tip: The main parameters of the calender usually refers to the number of rollers, diameter and length of work. According to these parameters can know the machine's process performance. In addition, these parameters are also the basis for the classification and presentation of calenders. According to the current standard, the presentation of the calender is as follows, such as calender 3-710-1800. This means that the three rolls are calendered     The main parameters of the calender usually refer to the number, diameter and length of the roll. According to these parameters can know the machine's process performance. In addition, these parameters are also the basis for the classification and presentation of calenders. According to the current standard, the presentation of the calender is as follows, such as calender 3-710-1800. This represents a three-roll calender with a roll diameter of 710 mm and a roller working portion length of 1800 mm, which is manufactured accordi...
Read more

About metal plate stamping and marking

Many factories offer a wide range of metal plate embossing and marking machines for embossing, recessing, indentation and marking of metal plates and labels, durable, can withstand discoloration, paint, corrosion and environmental damage. Metal label presses are also known as metal label embossing machines that can produce embossed or depressed numbers and alphabetic characters (usually simplex 2) on metal labels. The spot metal label marking machine uses a metal needle to permanently indent mark the surface to create indented dot matrix characters and high quality graphics. Metal Labels Laser Marking Machines Use Laser Beam Etching and Engraving High Quality Characters, Barcodes and Graphics. Some embossing roller machines and dot matrix players can generate 2D data matrix barcodes on metal labels that can be scanned with 2D data matrix bar code handheld scanners for automatic data collection and tracking. Metal Barcode Tracking software can be used for seamless integration of as...
Read more

What are the main types of calendering machine?

The main types of calenders are as follows: (1) according to the use of technology points, can be divided into paste calendering machine, rubbing calendering machine, tablet press, pressure-type calender, paste calender and experimental calender machine . (2) according to the number of rollers, can be divided into two-roll calender, three-roll calendering machine, four-roll calender, five-roll calendering machine and multi-roll calender (such as seven-roll calender). (3) According to the arrangement of the roller, can be divided into I-shaped calender, r-shaped (also known as inverted I-shaped or F-shaped) calender, I-calender, Z-calender, inclined Z-calender, S-shaped calender, A-shaped calender and other forms of calendering machine.
Read more